FAQs

You can only use capsules from K-fee® (Mr & Mrs Mill and ALDI® Expressi) in your K-fee® machine. The use of other capsules may result in damage to your K-fee® machine that is not covered by your warranty.

You are welcome to reach out to our friendly customer service team for advice on product compatibility and warranty.
Customer Service Email: hello@k-fee.com.au.

Please refer to the machine Instruction Manual for detailed instructions.

Visit K-fee Manual page HERE.

Fill the water tank to the mark with tap water and insert the water tank into the machine. Connect the power plug and switch on the machine. The machine will now heat up and all three preparation buttons will flash green. As soon as the lower light is in blue, your K-fee® machine is ready to use. Start by rinsing the machine using the rinse button. Insert your capsule into the capsule holder then press the small/large cup size to make a coffee. To have a longer service life and better coffee every time, we recommend you run the rinse function after each coffee.

The capsule machine is factory-set to a certain mL amount for each drink/button. You can change this setting as follows:

Insert capsule and place cup under spout. Press the desired button for at least 3 seconds and hold down the button until the desired filling quantity has been reached.

The adjustable range varies depending on the machine type.

This filling quantity is saved and remains stored even after you turn off the machine.

The capsule machine is factory-set to a certain mL amount for each drink/button. You can change this setting as follows:

Insert capsule and place cup under spout. Press the desired button for at least 3 seconds and hold down the button until the desired filling quantity has been reached.

The adjustable range varies depending on the machine type.

This filling quantity is saved and remains stored even after you turn off the machine.

Extreme temperatures may damage the capsule machine. For this reason, the device may only be used at temperatures between 10 and 45 °C and should be protected from frost. If the K-fee® capsule machine is transported at temperatures below freezing point, all water should be evaporated from the device beforehand. This will prevent residual water from freezing. You can find the instructions for evaporating the machine in the operating manual of your K-fee® capsule machine.

It depends based on the machine type. If the device is switched off but remains connected to the mains, the device (for example the K-fee® Wave) consumes less than 0.5 watts.

Yes, we are working on a number of exciting coffee varieties and beverages behind the scene. Sign up to our Newsletter to be first to know about our product launches.

Select a capsule from the range of Mr & Mrs Mill Espresso Capsules, open the lever and insert the capsule. Place a cup under the spout, if necessary remove the drip cup and move the grate to place a larger cup under the spout. Please refer to the packaging of the capsule you selected to find out which button must be pressed to start the brewing cycle.

Select a capsule from the range of Mr & Mrs Mill Lungo Capsules, open the lever and insert the capsule. Place a cup under the spout, if necessary remove the drip cup and move the grate to place a larger cup under the spout. Please refer to the packaging of the capsule you selected to find out which button must be pressed to start the brewing cycle.

K-fee® recommends regular cleaning. Frequently used capsule machines should be cleaned regularly to guarantee the quality of the beverages is sustained.

Quality directly
from K-fee
Manufacturer
warranty
Free AU shipping for
orders AUD$80+
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Discount will be calculated at checkout.